Friday, September 29, 2017

Vintage Tool Box Table - Creating Original Furniture by Attaching Legs


This summer while shopping a barn sale, I came across an awesome vintage wood tool chest. It was sturdy, nice and long and the finish had weathered to a beautiful patina. I knew exactly what I wanted to do with it. I wanted to give it some legs.

Influenced by my amazing friend Patty who works making tables and furnishings with reclaimed wood, I have been smitten by watching her put chunky legs on “things” and making furniture. I don’t have the carpentry skills of Patti…but this is so simple I knew even I could do it.

For this project, I worked with the tool chest and 4 carved wooden legs to create a tall side table. It is even cooler if you can find old legs that have their own personality, but since I had not come across any in my travels, I purchased 4 unfinished new legs from a friend. You can find similar ones here. I then stained them a dark walnut, painted them with home made white chalk paint and distressed them.

To assemble the table, my first step was turning the tool chest upside down and positioning the legs where I want them to attach. I measured each leg and inch from the sides and marked the spots.


 Then, I created a template with a centered hole and used that to mark where each leg would attach in each corner.


Now, I needed to attach a bolt to each leg was drilling a center Ideally, now in retrospect, it is awesome to find legs that already have a bolt inserted in them that attaches them to your table. In my case, the legs did not come with bolt already so I had to find the center in each leg, drill a hole and insert a hanger bolt. This is a bolt that has two ends...one which is inserted into the leg and then another which will screw into the table.


I drilled the hole with a 5/16 drill bit and then inserted the bolt.



Tip, so you don't strip the groves in the bolt, screw two nuts on it and center them, then you can use players to turn the bolt without damaging the bolt.


Next, I used a 5/16drill bit to drill 4 holes into the bottom of the chest. I then put wood glue on the top of each leg, and screw each leg into the chest by turning the legs until tight.

 To make sure this would be firmly attached. From the inside, I then used a washer and bolt to keep the legs in tight.



Finally, since the finish on the tool chest had such nice distressing on it, I only needed to rub on some of Miss Mustard Seed's hemp oil to bring the finish back to life.
 

Look at the difference this makes!! So simple and it just brings the wood back to life.


After it was all assembled and polished up right, I fell in love with it!! I originally planned to list this on my Etsy site, but I just couldn't part with it. But, I Think my new obsession is "putting legs on things" so I plan to have some interesting things up for sale soon!















Friday, September 22, 2017

The Boys' Bathroom update and an Empty Nest






My nest is empty. 21 years of kids in the house over like that. Sippy cups, field days, driving lessons….been there done that.

It is bittersweet. I have been so excited to see my boys off to college and to send them off to some of the best years of their lives. But I miss them! I have been essentially a stay-at-home mom, so finding my footing now, without my days defined by sporting events and lunches to pack, is strange… and a bit sad. 

But I am finding some real upsides to this empty nest thing. The boys’ rooms are always neat and the beds are made, I run the dish washer every other day, I do half the laundry loads a week and I am cleaning things in our home I haven’t thought about in years!!

It is now time for me to dig into home projects and grow a business… 

And I can find plenty of projects, let me tell you. With an old victorian farmhouse and a restless mind, there is always something to do. My youngest son's bathroom was the first thing to tackle…it is has been seriously in need of an update.  There was a very dated and cheap sink, grey square tile with black grout in the tub surround and a vintage black and white tile.





We decided to update the tile around the tub... and on the floor. Even though the floor sort of fit the house, my husband and son did not like it...at all! So, we choose a light weathered gray porcelain wood look tile.   






We really needed to keep this bathroom on a tight budget so I went with simple and clean. I was hoping to do a more interesting sink, but because of the plumbing, a simple sink with a large opening would ensure we did not have any extra plumbing costs. The pop of personality is going to come with a unique shower curtain and some slightly uncommon hardware. 
(shop the items with links below)

So, here is the bathroom after the wall tile was removed! We now need to replace those walls with cement board.



And here it is with the new gray tile...so much more pleasing on the eye don't you think!


-shopping links for bathroom products-






Thursday, August 3, 2017

Turning Furniture Into Art and My Love of Octopuses


During our “move to Florida that never happened,” 
my husband and I spent a lot of time looking at potential new homes and envisioning our perfect coastal interior. We wanted lots of whites and blues, of course, 
and… a recurring theme of octopuses.


As I looked at coastal home accessories, I became smitten by anything with an octopus on it. I found the twists and turns of an octopus’s arms just so visually cool. And, I loved that they could be so unusual looking and somehow at the same time cute in there own way.

This was the shower curtain I fell in love with for our boys' bathroom from the 
Etsy shop My Silly Pony.



Then, as quick as the opportunity to move south came, it disappeared and we decided to stay put in Maryland. We realized the were blessed to remain in our old Victorian Farmhouse and I embraced again the my clean farm look, 
but my fondness for tentacles remained.

As I thought about my next project, I found myself sketching octopuses and searching for a perfect piece of furniture to make one of the sketches come to life.  I had originally wanted to place the design sideways on a long piece of furniture, but I happened to find a beautiful tall mid century modern piece…so that become my canvas.

I believe every home needs a statement piece of furniture.
Something that is one of a kind and helps set the tone for the space. Furniture can be itself, a great piece of art.

To design my octopus, I looked at images of octopuses and then drew a rough sketch that would fit the piece of furniture I already had. But often, I have an idea or image and then need to find furniture that fits the picture best.




Tip, look for furniture with a mostly flat front, stay away from too many raised drawers and moldings. You want the front to become a smooth canvas.


Now, I am not a trained artist... at all and you don’t need to be.
 Practice drawing a sketch and you may be surprised what you can create. But, if that is not your thing, one of my favorite resources for images is the Graphics Fairy. For one of my favorite pieces, I used a beautiful bird image from there. 
Here are the steps I used to achieve this look.


If have also used countless French ephemera from the Graphics Fairy
which is my signature look! Follow the link here, to see my step by step process for a cream and gold french look.



Once I find an image to my liking, I print the image onto transparency paper (get that here.) For an image I draw, I simply take a picture of it with my phone and then print the picture onto transparency paper.




I like using a transparency, because I can shine up the picture and move the image in and out, making it larger or smaller, 
and find the perfect fit for the piece.



 I like an image to just fit or be larger and slightly off-center, 
creating unsymmetrical symmetry.

 Meaning, a balance of image and negative space which gives interest to a piece. I set my octopus off center slightly but see how it has balance.

hand painted octopus

For the octopus dresser, I based the dresser in Modern Masters warm silver (which is really a gold look) and followed with a white paint. This allows the gold to show through when I sand and distress the piece at the end. 



After drawing the outline of my octopus up, I based the outline in the warm silver and then painted him in a pallet of teals and blues.




Because I like my pieces to have a worn patina, I always sand the image at the end and sometimes I add a wash of white to soften the look when it is on white painted furniture.




When he was all painted, I sent him on his way to some wonderful customers in Florida...Lucky!!

Sharing this post at these great parties...








Monday, May 1, 2017

The Old School Renovation of the Old Barn Begins...

Well. We are finally settled...

This past year, my husband’s company was unexpectedly sold. Suddenly, our life was filled with a lot of uncertainty. Job security, job satisfaction, advancement was all unknown and many employees began to leave as other companies reached out to them. This included my husband. A lucrative offer came from another company and it was too good to pass up. The catch, it would move us to Florida.  Florida, with the sun and beach and more sun, that was the upside. The downside was we would be moving from the home we had just moved into two years ago, an old Victorian farmhouse that we were slowly updating. 


We prepared ourselves for the change and dove in, but the whirlwind we thought we were in for, with a move and traveling back and forth while our oldest son finished his senior year in high school, never happened. Our home sat on the market for over 9 months with just a ridiculous low-ball offer and lots of hemming and hawing by buyers about what needed to be fixed.

We were so stressed. We would now be losing tons of money if we lowered the price on the house and I was quickly losing my mind from all the showings. I simply cannot maintain that level of clean required to show a house. Not with two labs, a cat and teenage boys.





But then, by the grace of God, another company reached out to my husband. It was a great offer and, we could stay in Maryland, in our home. Thank you God.


So here we are, settled, finally, and the stories and blog can begin again.

The biggest project we had on our list of things to repair in our home was renovating the old barn/carriage house.



The barn, which probably dates to earlier than the 1863 house, was falling apart. Siding was falling off, windows were knocked out and if there had ever been doors on the front they were now gone too. It really looked like we need a bulldozer to come in and knock it down.





 But, if you looked closer, there were things that made it seem worth saving. It had a concrete subfloor put in by a previous owner, a metal roof that still was in good shape, and beautiful had hewn beams throughout that seemed like they would stand forever, given the chance.

It also had beautiful site lines. With the sharp-pitched roof and tall and narrow sides, it created a picture perfect view out our kitchen and sunroom. I had a feeling, if we replaced it with something new, every time I looked out our french doors I would regret it.



But, replacing it seemed an easy solution and letting a salvage company take the good wood, seemed to ease the guilt of knocking her down.

Then we met Buck. I had recently crossed paths with Buck on several occasions not realizing he renovated and salvaged old homes. Long story, short, Buck came out and visited our barn and wanted to restore it. And by that I mean he didn’t simply want the work, he wanted the opportunity to save the barn.

He walked around her and looked her up and down. Salvaging as much as he could, he would bring her back to life. 

And so, the new life for an old barn begins…



Related Posts Plugin for WordPress, Blogger...